Cut with bandsaw

we cut all of our materials through bandsaw with tolerances ranging described already in the budget, because according to the sizes of parts, these tolerances may vary. enjoy the ease of receiving material cut with band saw which are usually supplied in the market, cut with oxyfuel.the materials normally cut by cutting, by more than pass through the standardization process, can not always get a uniform hardness and typically stay with the harder side, resulting in a greater consumption of chips during machining of the material, not counting that the process of cutting bandsaw is not necessary to use a machining allowance, more than the excess metal that is normally our customers already place, which also generates a saving in weight in the purchase of parts that are charged by its respective weight. buying the 1045 cut by band saw with the savings you gain weight of the parts as well as its machining, enjoy!

Milled parts and blanche

we specialize in the sale of steel, but some of our customers, or need parts, where on account of their size, do not have machines that are able to plant them, or because of production bottlenecks, would like to receive the parts already squared to be placed directly in the machining centers, in short, on account of these and other reasons we develop the supply of spare squared in two different processes, where what varies are the dimensional tolerances of each case. in milled parts, the tolerance is 0.2 mm less than nothing, since the parts blanches tolerance is 0.08 mm less than nothing. ask your budget machined parts for this, just tell us the extent of their finished pieces and your budget will include both the price of raw material as it already machined.

Heat treatment

some materials can be supplied both in normal and with receiving special hardships.companies that have materials such as aisi 420 bars already dealt with in stock are "stuck" in the supply of this material only in the range of hardness that it contains. now, when you make personalized treatment for what you need, you gain in homogeneity that the parts will, and will have the material, the best range of application for your needs. this uniformity generates for our customers, gains in machinability, because the hardness variation that normally occurs when processing a block, tends to be higher than when the treatment is done in part because the size that will be used. this service is offered in the materials aisi 420, aisi h13 and 2711mod.contact us and you also have a custom material for the implementation of your company!

Ultrasound

the ultrasound test is very important and is usually only performed by the plant before delivery to the distributor. thus, the tolerances of discontinuities that are approved as being within a particular standard, releases the part as was the size of the starting block for clipping, which is usually not the size that most of the tools used. we're proud to be one of the few companies, the steel distribution industry worldwide, which has in its team, with technicians and equipment fit for the test parts, after cut, before they are sent to customers. with this, we work to avoid problems of discontinuity, which normally only appear in the stage of completion of the matrix, ie, shortly before its delivery to occur, as well as all the inconvenience that such events bring when they happen.

Brinell hardness test

some materials are usually supplied in the market in a certain range of hardness, as is the case of aisi p20 materials, well known. this material is provided with a certain hardness range of 270 to 310hb aproximandamente. we test the hardness of the parts before being sent to our customers since assuming the part is with a hardness below this range, will occur at the time of machining will be facilitated everything, nobody will complain, but when the mold is used maysuffer bruises earlier than normal which would decrease its useful life. in the other extreme, if the number goes up with a hardness range of the mold but not in machining squeezes already complain because of the difficulty and excessive consumption of inserts. therefore, we control this so that companies have the reassurance of working with the material in the range of hardness that was required, thereby making their planning is accomplished without generating costs that are not expected to writing his tools.

Eyelet holes

many companies buy their parts, but in time to unload them from the truck, get a real "fight."because people do not always remember to ask that the parts are delivered on pallets, and not all imams have to unload the parts, thus generating an impasse on how to discharge the piece.to avoid such situations, some companies have asked for us, and we have developed the process for making eyelet holes. giving the coordinates of the holes and the size and type of thread we need here in the holes, so for the piece arrives in the company, it put the eyelets, facilitating the landing and, moving further part in the company requesting the material. anything that facilitates movement within a company goes against the time savings and productivity gains, this detail that seeks to improve açoespecial for all its customers.